LatheCity.com
Wood Lathe Spindle MT3

[ Books ]

Tools:
[ Sherline ]
> [ LASER protractor ]
> [ Mechanical protractor ]
> [ Tailstock ]
> [ Lathe/Mill Stops ]
> [ Monster Vise ]
> [ Morse taper ]

[ Unimat ]
> [ Mechanical protractor ]
> [ Tools ]

[ China Lathe ]
[ Vintage ]
[ Craftsman ]
[ HiTorque Bench Lathe
SIEG SC2 ]
[ Custom designs ]

[ Learning Center ]
[ Product Tests ]
[ Freebies ]

[ How to order ]
[ FAQ ]
[ Customer Feedback ]
[ Customer Corner ]
[ Address ]
[ Contact ]
[ Returns ]
[ US shipping ]
[ International orders ]
[ Privacy ]
[ Site Map ]
[ Disclaimer ]
[ Home ]

[ LatheCity ]
(C) 2012, LatheCity

MT3 to 3/4-16 and
MT3 to 1-8TPI


Please read the safety notes before using any accessories:
[ Safety Booklet ]-PDF
[ Safety ]-HTML

Solution Graphics

[ Check orders ] We are also at [ EBay ] & [ Amazon ]

Wood lathe spindle package
Taper: Morse Taper #3 (MT3)
Bolt end: 3/4-16 and 1-8TPI
Pitch: 16 TPI and 8 TPI, RH
Thread length: approx. 1.5"
Drawbar: tapped for drawbar 3/8-16
Additionally included: 3/4-16 nut, 1-8TPI nut, washer
Included is what is shown on the figure to the left. All steel design.

 

$72+S&H
(1 in stock)
[ Contact ]

[get it at eBay]
 
  • MT3 to 3/4-16 (spindle only), $39+S&H (made to order)
  • MT3 to 3/4-10 (spindle only), $39+S&H (made to order)
  
LatheCity tip

[ Manual ]-read before ordering

These are right hand threads, i.e., don't reverse RPM.

The spindles have a runout smaller 0.02" which is
sufficient for wood lathes. The piece is cut on a
lathe with spindle runout of 0.0004"-0.0006"

[ Contact ] [ Custom designs ] [ Learning Center ] [ Home ] [ Back to Wood Lathe tools ]